Datapath ImageDP4 Manual do Utilizador descarregar pdf (Página 16)

When the TWIN tab is selected, the display driver reads the EDID information from each monitor and

reads the Registry to nd detailed display timing information.

The Source of Mode group box shows which mode sources are available for the selected resolution and

colour depth.

The Source of Mode has 4 options.

Default

Monitor timing information from the display driver’s internal tables.

Custom

Monitor timing information from the Registry. (See Appendix 1: Dening Custom Modes for details)

Monitor (Master)

Monitor timing information from the monitor attached to output 1 of the Master ImageDP4 is used for

all outputs.

Monitor (Each)

The monitor timing information from each monitor is used for the output connected to that monitor.

No. Screens

Change the number of screens the display driver uses. You should always install the driver (using install.

exe) for the maximum number of screens you want to use.

Screen Arrangement

Use the drop down menu to select the type of screen arrangement you require. The illustration in the

Monitor Conguration box will reect your choice.

Force DVI Output

If set, Force DVI Output limits the display modes available to those displayable via Single-Link DVI

(165MHz).

If clear, this allows display modes greater than 165MHz, for example 2560x1600 @ 60Hz.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22

Sem comentários

Datapath ImageDP4 Manual do Utilizador Página 16